欢迎进入东莞市马赫机械设备有限公司 官方网站!

贴心服务热线:

18665085700


产品展示

H

热销产品
数控冲床与折弯机配件

村田2048lT/UT数控冲床夹钳

时间:2016年12月10日来源:东莞市马赫机械设备有限公司 作者:东莞市马赫机械设备有限公司
村田2048lT/UT数控冲床夹钳

村田2048lT/UT数控冲床夹钳

        数控冲床气动夹钳是影响加工零件精度的重要原因之一。 长期使用后的气动夹钳上钳体和左右导臂,使上钳体在左右受力后偏摆控制在0.05mm以内。

       当上钳体在前后方向受力后也存在较大偏摆,这时应通过修配T型轴来降低间隙,其偏摆应控制在0.03-0.05mm以内。

      由于数控冲床气动夹钳以浮动原理进行设计,当各处间隙调整后上钳体应能够上、下浮动。

       如果夹钳中齿板有松动,就应对齿板联接螺钉加以紧定。如果数控冲床气动夹钳中齿板齿面磨平,应对齿板进行更换。
 

Murata 2048lT/UT CNC punch pliers
CNC punch press pneumatic clamp is one of the important reasons that affect the accuracy of machining parts.
1: after long-term use of pneumatic clamp pliers body and the left and right arm, the clamp force around after yaw control within 0.05mm.
2: when the clamp force in the fore-and-aft direction after there is a big swing, at this time should be to reduce the gap by repair type T axis, the deflection should be controlled within 0.03-0.05mm.
The 3: CNC punch press pneumatic clamp with floating principle design, when the gap around the upper clamp body should be adjusted to, floating.
4: if the clamp plate is loose, it should be tightly fixed tooth plate connecting screws. If CNC punch press pneumatic clamp tooth tooth plate surface smooth, should replace the tooth plate.

 

村田数控冲床参数

M-2048UT(M-2048UT-T)
冲切能力 200KN(20T)
冲床转速 900SPM
滑枕行程 3.3mm (UT)37mm (UT-T)
转塔间隙 25mm
板材尺寸(X*Y)  1250*2500
最大加工板厚 3.2mm(毛刷工作台规格)6.35mm(钢球工作台规格)
最大加工物重量 75Kg   150Kg
工作台行程 2550*1360mm
工作台移动速度(X*Y) 100*75m/min
工作台高度 980mm
弯喉深度 1340mm(UT)1322mm(UT-T)
转塔直径 1160mm
转塔工位数 44,54,56 (M2044UT/2048UT)
转塔转回速度 33rpm
滑枕伺服电机 30kw
定位工具              金型尺寸             回转速度            指令方式 最大直径88.9(M-2048UT-100rpm                     绝对坐标方式
电气设备容量 22kva
供气容量  压力      流量 0.5MPa(5.0kgfcm2)     0.1m3/min
冲床重量 12T
占用面积(X*Y) 5150*4750mm
机架高度 2145mm

分类:数控冲床与折弯机配件

既然来了,留下点什么吧

为了更好的为您服务

等候您的来电: 18665085700

安全验证-水平拖动滑块完成拼图